Filter
Top Products
STEP 4: Insert Card and Connect to LAN
1. If you have not done so already, soft reset your mobile computer.
Do not soft reset a Pocket PC 2003 when a Socket
card is inserted. Wait for the device reset to finish
before you insert the card.
2. Insert the 10/100 Ethernet CF Card into your mobile
computer. Make sure the card is right-side up.
Use a PC Card adapter to insert the card into a PC
Card slot.
3. Plug a cable from your LAN into the connector at the
top of the card.
4. LEDs on the card should turn on and/or blink,
depending on the connection status.
Status Indicator LEDs
LED LED Activity Meaning
Link
Solid Green Good Link
100 Solid Orange 100 Mbps mode
Activity
Blinking Green Activity
Collision
Solid Orange Collision
CHAPTER 2: SETUP 15