Filter
Top Products
19
www.soehnle-professional.com
3.
3. 3.
3. FAULTS
FAULTS FAULTS
FAULTS –
––
– CAUSES AND REMEDIES
CAUSES AND REMEDIES CAUSES AND REMEDIES
CAUSES AND REMEDIES
DISPLAY
DISPLAYDISPLAY
DISPLAY
CAUSES
CAUSESCAUSES
CAUSES
REMEDY
REMEDYREMEDY
REMEDY
The scale is not reset to »0.0 kg« when
switched on.
Unload the scale and restart the
display unit. If the error remains,
please contact your service partner.
Underload: only dashes appear at the bottom
of the display field.
Switch the display off and on again,
or pull out the mains plug. If the error
occurs again, please contact your
service partner.
Overload: only dashes appear at the top of
the display field. Maximum weighing range is
exceeded.
Unload the scale, or switch them off
and on again. Check the maximum
weighing range.
The weighing value does not stabilise. Check the surface under the scale,
and check that the weighing platform
is level. If the error persists after
readjustment, please contact your
service partner.
The weighing value does not stabilise.
Stand still or stabilise the weight on
the scale or restart the scale.
Height rod is not in reference position during
power-up
Fold up the height rod during power-
up.
The rechargeable battery is empty.
Charge the battery.
If the fault cannot be cleared, or other error messages appear, please contact your service
partner.