Filter
Top Products
20
Product support
If you have any questions about your Soehnle weighing system, you
should first refer to the documentation for the product.
Parameters for printer and interface configuration are permanently
stored in an internal memory. Access to user modification is by means
of the keypad and LCD display. If required please order the
instructions at your local Soehnle service partner or talk to the
manufacturer directly.
If your questions are still unanswered, contact your local Soehnle
service partner or talk to the manufacturer directly.
Your Soehnle-Partner
Soehnle-Waagen GmbH + Co.
Customer Service Department
P.O. Box 1265
D-71535 Murrhardt
Tel. 0 71 92 / 28-1
Fax 0 71 92 / 28-601
eMail: industriewaagen@soehnle.com
Accu-/battery operation
At the bottom of the scale you can find the battery holder.
8 batteries „baby cells 1,5 C“ or NiCd-accumulators of the
same size are required. The length of operation depends on
the quality of the batteries or accumulators, e.g. at an
accu-capacity of 1,4Ah appr. 8-10 operation hours.
During accu-resp. battery operation the background light of the display is switched off
automatically. If rechargeable batteries are not used for a longer time, they must be rechar-
ged every 4-5 months.
Remedy
Change batteries or recharge
accumulators.
Change batteries or recharge
accumulators.
Message during battery
o p e r a t i o n
Residual length of operation
app. 10 min.
Display shows
b a t t e ry - e m p t y - m e s s a g e .
Scale cannot be switched on
during accu or battery
o p e r a t i o n .
If accumulators are used they cannot be re c h a rged in the scale.
B a t t e ry chargers are available in electronic store s .
7746_02_99.qxd 11.03.1999 17:08 Uhr Seite 25