Filter
Top Products
5
4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option
Getting Started . . .
2
. SYSTEM DESCRIPTION
NOW, production switchers can load & play video clips on Sony MAV DDRs.
Use the EMEM or SNAPSHOT Learn & Recall functions of the production switcher to load
and play a video clip from a Recall or timeline.
Use the Run and Trigger functions of the production switcher to Play, Stop or Recue the video
clip.
Instantly load a video clip at the press of a button.
Instantly load a FILL clip & KEY clip at the press of ONE button, then play out both channels
in sync. LOOP up to 4 channels.
Control up to 4 video channels individually or ganged.
FEATURES
The 4000CL-MAV-PBIO, 400 Clip Instant Access System consists of the ST300-SSM with
Cliplist software.
With this Option, the ST300 has 4 Peripheral Device Addresses, one for each VTR that it controls.
This allows the production switcher to control any and all VTRs connected to the ST300.
Upon receipt of the Learn command from the production switcher, the ST300 saves the CLIP IDs
of the currently loaded clips, the current time of each clip, the VTRs they are loaded on, and the
current GANG mode, into the appropriate Cue Point.
When the Recall command is received, the ST300 loads the “Learned” Clips onto the “Learned”
VTRs, cues the Clip to the “Learned” time, then restores the “Learned” GANG mode.
The Trigger function on the production switcher puts the selected VTRs into Play, Stop, Recue or
other available modes.
DEFINITIONS
Throughout this document, “Video Server” refers to the MAV-555.
The ST300-S/SM as the ST300.
Words surrounded by brackets, for example, [ENTER], are keys on the ST300.
[XXX] + [XXX] means hold the two keys down simultaneously.
“Softkeys” are the row of keys directly below the display that perform multiple functions in
MENU and other modes.