Filter
Top Products
33 (GB)
To set the change to the standby mode at the
END TIME
1 After selecting AUTO for PIC INVERSION
mode, select POWER OFF and press ENT.
The following menu appears on the monitor
screen.
ENTER
MENU
PIC INVERSION : AUTO
POWER OFF : NO
SELECT SET END
2 Select YES with M/m and press MENU.
The monitor changes to standby mode at the
designated END TIME.
Notes
• The power off function, power saving function and
on/off timer function in the POWER CONTROL
menu cannot be used simultaneously. When one of
those functions is set to YES, “– – – –” appears next
to the others and their functions are not available.
• If you set START TIME and END TIME to the same
time, the setting of START TIME takes priority over
that of END TIME. The display does not return to
the original display at the END TIME.
Changing the Display Position
Automatically
1 In the SCREEN SAVER menu, press M/m to
move the cursor (B) to “PIC ORBITING” and
press ENT.
The following menu appears on the monitor
screen.
ENTER
MENU
PIC ORBITING
ORBI T ING : OFF
ORBI T RANGE : 5do t
ORBIT CYCLE : 10sec
SELECT SET END
2 Press M/m to move the cursor (B) to
“ORBITING” and press ENT.
The following menu appears on the monitor
screen.
ORBI T ING : OFF
3 Select the ORBITING mode with M/m.
OFF: Cancel the PIC ORBITING function.
ON: Set the PIC ORBITING function.
4 Press MENU.
The menu returns to the PIC ORBITING menu.
5 Select ORBIT RANGE (moving distance) or
ORBIT CYCLE (time) with M/m and press ENT.
The following values can be selected:
ORBIT RANGE: 5dot, 10dot, 15dot, 20dot
ORBIT CYCLE: 10sec, 30sec, 1min, 5min
The following menu appears on the monitor
screen. (The illustration below is for selecting
ORBIT RANGE.)
ORBI T RANGE : 5do t
6 Adjust the ORBIT RANGE or ORBIT CYCLE
with M/m and press MENU.
When both PIC INVERSION and PIC
ORBITING are set to ON
If the PIC ORBITING function is actuated while the
picture is reversed, the reversed picture is displayed
changing position.
Reducing Afterimage/Ghosting (Screen Saver Function)