Filter
Top Products
7 (GB)
Screws
Remote
Commander
Location and Function
of Parts and Controls
Front / Sides
1 Retractable feet
Use for setting the monitor on the floor.
For details on using the retractable feet, see “Using the
Retractable Feet” on page 13 (GB).
2 Control panel
For details on the control panel, see “Control Panel” on
page 8 (GB).
3 Left panel cover
Open this when using the left connector panel.
You can install the Remote Commander in a slot on
the back of this cover.
For details on opening the panel cover, see the right-hand
side of this page.
4 Left connector panel
For details on the left connector panel, see “Left Connector
Panel” on page 10 (GB).
5 Right connector panel
For details on the right connector panel, see “Right
Connector Panel” on page 9 (GB).
6 Right panel cover
Open this when using the right connector panel.
For details on opening the panel cover, see below.
To open the panel cover
Loosen the screws counterclockwise and open the cover.
To take off the panel cover
Loosen the screws as illustrated below and take off
the panel cover.
To install the Remote Commander in the
panel cover
Install the Remote Commander in the slot on the back
of the left panel cover as illustrated below.
Note
When housing the Remote Commander, make sure
that the top of the Remote Commander faces upward
and the rear faces outside.
Left side
Front
Right side
Location and Function of Parts and Controls
4
3
1
2
5
6