Filter
Top Products
13
Operation
Location of 3 LEDs
There are three LED indications (Tape Motion, Cleaning Request, Replace
Tape) and an EJECT button on the front panel of the unit.
Front Panel (for 3.5" Standard Height)
TAPE
MOTION
LED
HARD RESET HOLE
EJECT BOTTON
CLEANING
REQUEST
REPLACE
TAPE
Advanced
Intelligent
Ta pe
3
LED Indication for Drive Status
The LED indicators are defined as follows
LED
Tape Motion Cleaning Request Replace Tape Sense
A Independent Independent Tape Loaded
B Independent Independent Tape Access in Progress (write/read)
C Independent Independent Tape Access in Progress (others)
Independent A Independent Cleaning is requested
Independent B Independent Cleaning is Not Completed
Independent Independent A Media Error Occurred
C C C H/W Error Occurred
A: On
B: Slow (0.9 sec on/0.3 sec off)
C: Fast (0.3 sec on/0.3 sec off)