Filter
Top Products
7
GB
Preparations for Using the Networking Function
When the option slot is located on
the left side of a Display unit*
* The location of the option slot differs
depending on the model of the Display
unit. If your Display unit has more than
one option slot, install the device in a
COM port, a slot used for the network.
Refer to the Operating Instructions for the
FWD series as well.
2 Check the direction (top/bottom) of
this device and insert it into the flat
panel display. Make sure that the
connector inside the Display is firmly
connected.
Using a slot screwdriver, tighten the
two screws of this device. Connect the
LAN cable, as needed.
Caution
Do not touch the connector inside the
Display. Doing so may result in injury to
yourself or cause this device to
malfunction.
INPUT 2
RGB / COMPONENTAUDIO
L
R
AUDIO
OUT
NETWORK MANAGEMENT
1
2
2