Filter
Top Products
12
AL
LINE OUT
USB
CONTR
LINE IN
MIC
MONITOR
PRINTER
2
Installation
p Step 1: Connect the computer
With the computer switched off, connect the video signal cable to the
display (VGA) connector on your computer. If your computer supports
the DDC plug-and-play standard, this connection will enable DDC
communication between the display and the computer.
The video signal cable is combined with audio and microphone cables.
If your computer is equipped with sound capability, connect the audio
(green) and microphone (red) plugs to appropriate jacks located on your
computer.
✔Note on handling the video signal cable
Do not touch the pins of the video signal cable.
Computer
Getting Started
Red (to microphone
connector)
Blue (to monitor
connector)
Green (to LINE OUT
connector)
Fasten the
screw of the
blue plug.