Filter
Top Products
5
US
Identifying parts and controls
See the pages in parentheses for further details.
1 INPUT (input) switch (page 8)
This switch selects the INPUT 1 (video input 1 connector:
y1) or INPUT 2 (video input 2 connector: y2).
2 PICTURE EFFECT button (page 10)
This button is used to change the preset picture effects’
modes.
3 MENU button (page 9)
This button is used to display or close the menu.
4 Control button (OK, M/m) (page 10)
This button is used to make adjustments to the monitor and
call up the CONTRAST menu directly.
5 ! (power) switch and indicator (pages 7, 17, 21)
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on, and lights up
in orange when the monitor is in power saving mode.
6 AC IN connector (page 7)
This connector provides AC power to the monitor.
7 Video input connectors (HD15) (y1/y2) (page 6)
These connectors input RGB video signals (0.700 Vp-p,
positive) and sync signals.
* DDC (Display Data Channel) is a standard of VESA.
INPUT
PICTURE EFFECT
MENU
OK
12
AC IN
21
AUDIO IN
VOL
Front
Rear
rear side
forward side
5 4 3 2
1
678910
1112131415
Pin No. Signal
1Red
2 Green (Sync on Green)
3Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
8 Blue Ground
9 DDC + 5V*
10 Ground
11 ID (Ground)
12 Bi-Directional Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock (SCL)*
(continued)