Filter
Top Products
6
7
Precautions
Installation
• Avoid placing the drive in a location subject to:
–high humidity
–high temperature
–excessive dust
–mechanical vibration
–direct sunlight.
We recommend to use the drive in a horizontal or vertical position. Do
not use it in a tilted position.
Operation
• Do not move the drive during operation. This may cause it to malfunc-
tion during reading or writing.
• Avoid exposing the drive to sudden changes in temperature as conden-
sation may form on the lens inside the drive as a result. Should the
surrounding temperature suddenly rise while the drive is on, wait at
least one hour before you turn off the power. Operating the drive
immediately after a sudden increase in temperature, may result in a
malfunction during reading or writing.
Transportation
• Close the disc drawer before moving the drive.
• Keep the original packing materials for future transport of the drive.
Rear Panel
1 Digital Audio
2 Analogue Audio
3 Master / Slave Jumpers (refer to page 09 for details)
4 Interface Connector (IDE bus)
5 DC INPUT (power-in) connector
Pin 1
1 2 3 4 5