Sony CX125 Projector User Manual


 
35
Using a MENU
Adjustments and Settings Using a Menu
To clear the menu
Press the MENU key.
The menu disappears automatically if a key
is not pressed for one minute.
To reset items that have been
adjusted
Select the item that you want to reset, and
press the RESET key on the Remote
Commander.
“Complete!” appears on the screen and the
setting of the item that you have selected is
reset to its factory preset value.
Items that can be reset are:
“Contrast,” “Brightness,” “Color,” “Hue”
and “Sharpness” on the “Adjust Picture...”
menu of the Picture menu
“Dot Phase,” “H Size,” and “Shift” on the
“Adjust Signal...” menu of the Signal
menu
“Side Shot” on the Installation menu
(VPL-CX125/CX155/CW125 only)
Storage of the settings
The settings are automatically stored in the
projector memory when the ENTER key is
pressed.
The resetting item of the Lamp timer setting is
not memorized.
If no signal is input
If there is no input signal, “Cannot adjust
this item.” appears on the screen.
Unadjustable items
Items that cannot be adjusted, depending on
the input signal, are not displayed on the
menu.
For details, see page 45.
Note