Filter
Top Products
13
4 Press to highlight Category (equipment
type), and press .
Select an equipment type from the list, and
press .
Setup/IR Blaster/HDMI 1
Category
Maker
Code
Test (Power
Save and Ex
Cable Box
Satellite
VCR
DVD
BD
Receiver
5
Press to highlight Maker, and press .
Select a manufacturer from the list, and press
.
Setup/IR Blaster/HDMI 1
Category
Maker
Code
Test (Power
Save and Ex
Sony
LG
Panasonic
Philips
Pioneer
Samsung
6 Press to highlight Code, and press .
Select a code from the list, and press .
Setup/IR Blaster/HDMI 1
Category
Maker
Code
Test (Power On/Off)
Save and Exit
BD 1
BD 2
BD 3
See page 15 on Reference Guide if your
code is not on the list.
• When more than one code is available for your
manufacturer, start checking from the top of the list for
the code that operates your equipment.
7 Press to highlight Test (Power On/Off)
and press .
Test to see if the selected equipment power
turns on and off.
You may need to test more than one code to
find the right code for your equipment.
• If the equipment’s supplied remote control has both
POWER ON and POWER OFF buttons, using Test
(Power On/Off) might not work to test the IR code.
Select Save and Exit then check if any other remote
buttons will operate your equipment.
Setup/IR Blaster/HDMI 1
Category
Maker
Code
Test (Power On/Off)
Save and Exit
BD
Sony
BD 1
8
When you have found the right code, press to
highlight Save and Exit, and press .
Save the setting and exit from the Setup
menu.
Setup/IR Blaster/HDMI 1
Category
Maker
Code
Test (Power On/Off)
Save and Exit
BD
Sony
BD 1
• Do not connect two of the same equipment from
the same manufacturer (Eg. two Sony Blu-ray disc
players), you will not be able to control each equipment
individually.
• To erase the code, select
Category, then press to
highlight “----” and press in step 4.