Filter
Top Products
7
Introduction
A Power indicator
Indicates the power status.
Lit: Power on
Off: Power off
B Busy indicator
Indicates the drive status.
Lit: The drive is Writing,
Formatting, Reading data,
Erasing, Load & Eject.
Blinking: The drive is Playing back an
audio CD.
Off: The drive is in a state other
than those outlined above.
C Eject button
Press to open the disc tray.
D Emergency eject hole
If you cannot open the disc tray with the
eject button, turn off the drive, and then
insert a thin, elongated object into this
hole to eject the disc tray manually.
E Disc tray
Insert discs here, label side up.
Hint
When you insert a disc, use your fingers to
press around the center of the disc until it is
firmly seated in the drive.
When you remove a disc, lift up on the edge
of the disc with your thumb while supporting
the center of the disc with your forefinger.
F USB Connector
Used with a USB cable to connect the
drive to a computer.
G DC IN Jack
Connect the supplied AC power cord to
the AC power adapter. Connect this
assembly to the DC IN jack, and then
connect the whole to the AC outlet.
Note
Be sure to use the supplied AC power adapter.