Filter
Top Products
18 Specifications
Specifications
The following specifications show the reference
performance for this unit and individual option boards/
modules.
Design and specifications are subject to change without
notice.
DVS-9000 Production Switcher
Processor
General
Power requirements
100 to 240 V AC, 50/60 Hz
Current consumption
100 V: 8.5 A, 240 V: 4.2A
Peak inrush current
(1) Power ON, current probe method:
60 A (100 V), 110 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1: 40 A
(230 V)
Operating temperature
5ºC to 40ºC (41ºF to 104ºF)
Performance guaranteed temperature
10ºC to 35ºC (50ºF to 95ºF)
Storage temperature
−20ºC to +60ºC (−4ºF to +140ºF)
Operating humidity
10% to 90%
Dimensions (w/h/d, excluding projections)
482×354×520 mm
(19×14×20
1
/
2
inches)
Mass Approx. 43 kg (9 lb 7 oz)
Control connectors
CTRL RJ-45
Complies with 100Base-TX standard
DATA RJ-45
Complies with 100Base-TX standard
REMOTE 1, 2, 3, 4
D-sub 9-pin, female
Comply with RS-422A standard
Data transfer rate: 38.4 Kbps
GPI D-sub 25-pin, female
TTL inputs: 8
Relay contact outputs: 4 (30V AC/DC,
0.1A)
Open collector outputs: 4
TERMINAL D-sub 9-pin, female
Complies with RS-232C standard
Data transfer rate: 9600 bps
EXT BNC type, 75Ω
S-BUS data transfer rate: 312/1250 Kbps
Reference input and output
REF IN BNC type, 75Ω, with loop-through
output
Analog black burst/analog sync
REF OUT BNC type, 75Ω
Analog sync
Signal level ±300 mV ±10%
Phase variation range
−90H to +90H
Video input
Inputs 17 (BNC type)
Signal format SMPTE259M-C
Signal level 0.8 V p-p ±10%
Signal tansfer rate
270 Mbps
Return loss 15 dB
Cable length 200 m (5C-2V cable, BELDEN8281 or
equivalent)
Video output
Outputs 24 (BNC type): 1 to 4 and 13 to 16, each
with 2 outputs
Signal format SMPTE259M-C
Signal level 0.8 V p-p ±10%
Signal tansfer rate
270 Mbps
AC input
AC IN A, B, C, D
3-pin AC connector
Accessories supplied
75Ω terminator (1)
Bracket (4)
Support angle (2)
Screw (+B4×10) (8)
Screw (+PSW 4×10) (8)
Operation Manual (1)
Installation Manual (1)
Accessories not supplied
AC power cord (for USA and Canada only) (125 V 10 A
2.4 m (8 ft)) (Part No.: 1-557-377-11)
AC power cord (for Europe only) (250 V 10 A 2.4 m (8 ft))
(Part No.: 1-782-929-21)