Filter
Top Products
31
Specifications
Others
*1: For details, refer to “Acceptable Input Signals” on page 33.
*2: Information on accessories in this manual is current as of April 2011.
*3: Not all optional accessories are available in all countries and area. Please check with your local
Sony Authorized Dealer.
Design and specifications of the unit, including the optional accessories, are subject to change
without notice.
Others connector RS-232C connector: D-Sub 9 pin female
Operating
temperature/
Operating
humidity
0 °C to 40 °C (32 °F to 104 °F)/20% to 80% (no
condensation)
Storage
temperature/
Storage humidity
–10 °C to +60 °C (14 °F to 140 °F)/ 20% to 80% (no
condensation)
Power
requirements
100 V to 240 V AC, 3.0 A-1.3 A, 50/60 Hz
Power
consumption
100 V AC: 290 W
240 V AC: 275 W
Standby power 100 V AC: 3 W (when “Standby Mode” is set to
“Standard”)/1 W (when “Standby Mode” is set to “Low”)
240 V AC: 3 W (when “Standby Mode” is set to
“Standard”)/1 W (when “Standby Mode” is set to “Low”)
Heat dissipation 100 V AC: 990 BTU
240 V AC: 940 BTU
Standard
dimensions
(W/H/D)
Approx. 313.4 × 129.6 × 279.2 mm (12
11
/32 × 5
3
/32 ×
11)
Approx. 313.4 × 114.1 × 269 mm (12
11
/32 × 4
1
/2 ×
10
19
/32 inches) (without projecting parts)
Mass Approx. 3.2 kg (6 lb 15 oz)
Supplied
accessories
See “Checking the Supplied Accessories” in the supplied
Quick Reference Manual.
Optional
accessories
*2
*3
Projector Lamp LMP-E211 (for replacement)
Item Description
Model VPL-EW130
Notes
Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE
FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT
OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.