Filter
Top Products
41
Replacing the Lamp
Maintenance
• Be careful not to touch the glass surface
of the lamp.
• The power will not turn on if the lamp is
not secured properly.
6 Restore the lamp cover to the original
position and tighten the three screws
with the phillips screwdriver.
Be sure to attach the lamp cover securely
as it was. If not, the projector cannot be
turned on.
7 Connect the power cord.
The ON/STANDBY indicator lights in
red.
8 Press the ?/1 key to turn the projector
on.
9 Press the MENU key, and then select
the Setup menu.
10Select “Lamp Timer Reset”, and then
press the ENTER key.
A message is displayed.
11Select “Yes”, and then press the
ENTER key.
The Lamp Timer is initialized to 0, and
“Lamp Timer Reset Complete!” is
displayed in the menu screen.
12Select “OK.”
Do not put your hands into the lamp
replacement slot, and do not allow any liquid or
other objects into the slot to avoid electrical
shock or fire.
To erase a message, press any key on the
control panel of the projector or on the Remote
Commander.
Disposal of the used lamp
For the customers in the USA
This product contains mercury. Disposal of
this product may be regulated if sold in the
United States. For disposal or recycling
information, please contact your local
authorities or the Electronics Industries
Alliance (http://www.eiae.org).
Notes
Note
Caution
Note