Sony GDM-200PST9 Computer Monitor User Manual


 
14
Customizing Your Monitor
Note
The picture may become fuzzy when CANCEL MOIRE is set to
“ON.”
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
The selected item is reset to the factory setting.
For
TOP
V CONVER TOP
BOT
V CONVER BOTTOM
CANCEL MOIRE
ADJ
MOIRE ADJUST
Press
/ . . . to shift red shadows up and blue
shadows down
? . . . to shift red shadows down and blue
shadows up
/ . . . to shift red shadows up and blue
shadows down
? . . . to shift red shadows down and blue
shadows up
/ . . . to turn CANCEL MOIRE “ON”
? . . . to turn CANCEL MOIRE “OFF”
/ or ? . . . to adjust the screen until the
moire is at a minimum
ON
OFF
ON
OFF
50
* Moire is a type of natural interference which produces soft or
wavy lines on your screen. It may appear due to interference
between the regulated pattern of the picture from the input
signal and the phosphor pitch pattern of the CRT.
Example of moire:
Select
CANCEL MOIRE*
ADJ
MOIRE ADJUST
To
turn the moire cancellation function
“ON” or “OFF.” CANCEL MOIRE
must be “ON” for “ ADJ (MOIRE
ADJUST)” to appear on the screen.
adjust the degree of moire
cancellation
4 Press the >?// buttons to adjust the settings.
For
H CONVERGENCE
V CONVERGENCE
Press
/ . . . to shift red shadows to the right and
blue shadows to the left
? . . . to shift red shadows to the left and
blue shadows to the right
/ . . . to shift red shadows up and blue
shadows down
? . . . to shift red shadows down and blue
shadows up