Filter
Top Products
8
EN
x Using the MENU and control buttons
1 Display the menu.
Press the MENU button to display the menu on the screen.
2 Select the menu you want to adjust.
Highlight the desired menu by moving the control button up
or down. Then press the control button.
3 Adjust the menu.
Move the control button up or down to make the adjustment
and press the control button.
If you want to select another menu;
move the control button up or down to select and press the
control button to exit the menu.
4 Close the menu.
Press the MENU button. If no buttons are pressed, the menu
closes automatically after about 45 seconds.
Adjusting the brightness and
contrast (CONTRAST/BRIGHT)
These settings are stored in memory for the signals from the
currently selected input connector.
1 Press the MENU button.
The menu appears on the screen.
2 Move the control button up or down to highlight .
Then press the control button.
The CONTRAST/BRIGHT menu appears on the screen.
3 Move the control button up or down to highlight 6
or . Then press the control button.
4 Move the control button up or down to adjust the
contrast (6) or brightness ( ). Then press the
control button.
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR MODE ( ) of the
OPTION ( ) menu, the following CONTRAST/BRIGHT menu
appears on the screen.
You cannot adjust the contrast (6) or brightness ( ) on this
screen. If you want to adjust them, select a mode other than sRGB
in the COLOR MODE ( ) of the OPTION ( ) menu.
For more information about using the sRGB mode, see
“Adjusting the color of the picture (COLOR)” on page 12.
MENU
OK
OK
OK
OK
MENU
CONTRAST
s
:/
RGB
/IBR GHT
MENU
EXIT
: