Sony GR170 Laptop User Manual


 
Connecting a Power Source
21
To remove the battery pack
1 Push the battery bay cover down to open it.
2 Pull out the battery pack.
3 Push in and lift up the battery bay cover until it clicks.
Notes on the battery
To determine the remaining battery charge, see “Displaying Battery
Information” in the online User Guide for more information.
When the battery power is running low, both the battery and power
indicators blink.
When the notebook is directly connected to AC power and has a battery pack
in the battery bay, it uses power from the AC outlet.
See “Using a Second Battery Pack” in the online User Guide for
information on installing and charging a battery pack in the multipurpose
bay.
Keep the battery pack in the notebook while it is directly connected to AC
power. The battery pack continues to charge while you are using the
notebook.
If the battery level falls below 10 percent, you should either attach the AC
adapter to recharge the battery, or shut down your notebook and insert a fully
charged battery.
Removing the battery pack
You will lose data if you remove the battery pack while the notebook is on
and not connected to the AC adapter, or if you remove the battery while the
notebook is in a power saving mode.