Filter
Top Products
4
Adjustments
Navigating the menu
1 Press the center of the Joystick to display the main
menu.
2 Move the joystick m/M to highlight the main menu you
want to adjust and press the center of the Joystick.
3 Move the joystick m/M to highlight the sub menu you
want to adjust. Then move the joystick </, to make
adjustments.
Adjusting the brightness and contrast
Brightness and contrast adjustments are made using a separate
BRIGHTNESS/CONTRAST menu. These adjustments are
effective for all input signals.
1 Move the joystick in any direction to display the
BRIGHTNESS/CONTRAST menu.
2 Move the joystick m/M to adjust the brightness ( ),
and </, to adjust the contrast ( ).
Note
If you set the brightness and contrast level to “0”, the picture will black out
and no picture will appear.
,
60.0kHz/ 75Hz
1024
768
the horizontal
and vertical
frequencies
of the current
input signal
the resolution of the current
input signal (only if the signal
matches to one of the
recommended VESA timing
modes).
Main menu
,,
Sub menu
26
SIZE/CENTER
26 26
BRIGHTNESS/CONTRAST