Filter
Top Products
32
GB
Selecting the Illumination Mode of LCD
Back Light
LIGHT OP: The display window is illuminated for 3 seconds after each
operation.
LIGHT All: The display window is illuminated at all times during
operation.
1 Press MENU to enter the menu mode.
2 Press –= or ++ to display “LIGHT”
and press (pPLAY/STOP.
“OP (or All)” will flash.
3 Press –= or ++ to select “OP” or
“All” and press (pPLAY/STOP.
Now the setting is completed.
4 Press MENU to exit the menu mode.
When the unit is not being operated (when the display shows the current
time), you can illuminate the display window by pressing STOP. This
enables you to check the time even in a dark place.
Note
The effect of the illumination may be reduced in a bright location.