Filter
Top Products
– 24 –
34
Cannot receive upper channels
(UHF) when using an antenna
No color
Only snow and noise appear on
the screen
Dotted lines or stripes
TV is fixed to one channel
Double images or ghosts
Cannot operate the menu
Cannot receive any channels
when using cable TV
Cannot gain enough volume when
using a cable box
Canal favorito does not display
your choices
Some video sources do not
appear when you press TV/VIDEO
Recording through MONITOR OUT
does not function properly when
recording in PIP mode
Cannot play shooting games
• Make sure “Cable” is “No” in the Ajuste de canal menu. (see “Cable” on page 25)
• Use “Auto programación” to add receivable channels that are not presently in the TV’s memory. (see “Auto programación” on page 25)
• Adjust “Color” in the Video menu. (see “Ajuste de imagen” on page 20)
• Black and white programs cannot be seen in color.
• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 13)
• Set the appropriate TV color system in the Ajustes menu. (see “Sistema de color” on page 29)
• Check the “Cable” setting in the Ajuste de canal menu. (see “Cable” on page 25)
• Check the antenna/cable connections.
• Make sure the channel is broadcasting programs.
• Press ANT to change the input mode. (see “ANT” on page 16)
• Set the appropriate TV color system in the Ajustes menu. (see “Sistema de color” on page 29)
• Adjust the antenna.
• Keep the projection TV away from noise sources such as cars, neon signs or hair-dryers.
• Use “Auto programación” to add receivable channels that are not presently in TV’s memory. (see “Auto programación” on page 25)
• Use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings).
• If the item you want to choose appears in gray, you cannot select it.
• Press the projection TV’s power button off and on again.
• Make sure “Cable” is “Sí” in the Ajuste de canal menu. (see “Cable” on page 25)
• Use “Auto programación” to add receivable channels that are not presently in the TV’s memory. (see “Auto programación” on page 25)
• Increase the volume at the cable box. Then press TV (FUNCTION) and adjust the projection TV’s volume.
• Verify that “Canal favorito” is set to “Manual” in the Ajuste de canal menu. (see “Setting Canal favorito manually” on page 26)
• Ensure that “Etiqueta de video” is not set to “Omitir.” (see “Etiqueta de video” on page 29)
• MONITOR OUT will not record both images in PIP. Only the main picture will be recorded.
• If you are recording the main picture and you switch to the sound of the sub picture using the AUDIO button, the main picture will be recorded with sound
from the other program.
• Some shooting games which involve pointing a light beam at the TV screen with an electronic gun or rifle cannot be used with this projection TV. For
details, see the instruction manual supplied with the video game software.
Troubleshooting (continued)