Filter
Top Products
Using the Menu
21
3
Press the M or m button to select the following
menu, then press the , or ENTER button.
LMD-1410/2010: USER CONFIG (User
Configuration) menu
LMD-1420/2020: USER CONFIG 1/2 (User
Configuration 1/2) menu
The setting items (icons) in the selected menu are
displayed in yellow.
LMD-1410/2010
.
LMD-1420/2020
4
Press the M or m button to select “LANGUAGE,”
then press the , or ENTER button.
The selected item is displayed in yellow.
5
Press the M or m button to select a language, then
press the ENTER button.
The menu changes to the selected language.
LMD-1410/2010
.
LMD-1420/2020
To clear the menu
Press the MENU button.
The menu disappears automatically if a button is not
pressed for one minute.
Using the Menu
The unit is equipped with an on-screen menu for making
various adjustments and settings such as picture control,
input setting, set setting change, etc. You can also
change the menu language displayed in the on-screen
menu.
To change the menu language, see “Selecting the Menu
Language” on page 20 (GB).
The current settings are displayed in place of the x
marks on the illustrations of the menu screen.
1
Press the MENU button.
The menu appears.
The menu presently selected is shown as a yellow
button.
2
Use the M or m button to select a menu, then press
the , or ENTER button.
The menu icon presently selected is shown in
yellow and setting items are displayed.
LMD-1410/2010
.
· RGB/COMP SEL xxxx
· COMP LEVEL xxxxx
· NTSC SETUP x
· GAMMA x
· FORMAT DISP xxxx
xLANGUAGE ENGLISH
· PIC DELAY MIN xxx
USER CONFIG
· RGB/COMP SEL xxxx
· COMP LEVEL xxxxx
· NTSC SETUP x
· GAMMA x
· FORMAT DISP xxxx
xLANGUAGE ENGLISH
USER CONFIG (1/2) Rr
· RGB/COMP SEL xxxx
· COMP LEVEL xxxxx
· NTSC SETUP x
· GAMMA x
· FORMAT DISP xxxx
xLANGUAGE ENGLISH
· PIC DELAY MIN xxx
USER CONFIG
· RGB/COMP SEL xxxx
· COMP LEVEL xxxxx
· NTSC SETUP x
· GAMMA x
· FORMAT DISP xxxx
xLANGUAGE ENGLISH
USER CONFIG (1/2) Rr
RESET
MENU VOLUME POWER
KEY
INHIBIT
ENTER
LINE A LINE B SDI SCANASPECT
RESET
MENU VOLUME POWER
KEY
INHIBIT
ENTER
RGB/
COMPONENT
EXT
SYNC
BLUE
ONLY
2~4 1
FORMAT xxxxxxxxx
xxxxxxxx
COLOR TEMP xxx
GAMMA x
COMP LEVEL xxxxx
NTSC SETUP x
RGB/COMP SEL xxxx
SCAN MODE xxxx
STATUS (1/2) Rr
· RGB/COMP SEL xxxx
· COMP LEVEL xxxxx
· NTSC SETUP x
· GAMMA x
· FORMAT DISP xxxx
xLANGUAGE ENGLISH
· PIC DELAY MIN xxx
USER CONFIG