Filter
Top Products
22
Specifications
Video signal formats
The unit is applicable to the following signal formats.
*1 Also supports frame rate 1/1.001.
Applicable DVI input signals
When a PC signal is input to the HDMI IN connector using a DVI conversion cable
Note
The sides of the displayed picture may be invisible depending on
the input signal.
When an optional input adaptor is conneted, the unit is applicable
to the following signal formats.
When BKM-320D is connected
System Total lines Active lines Frame rate Scanning format Aspect ratio Signal standard
575/50I (PAL) 625 575 25 2:1 interlace 16:9/4:3 EBU N10
(PAL: ITU-R BT.624)
480/60I (NTSC)
*1
525 483 30 2:1 interlace 16:9/4:3 SMPTE-253M
(NTSC: SMPTE-170M)
576/50P 625 576 50 Progressive 16:9/4:3 ITU-R BT.1358
480/60P 525 483 60 Progressive 16:9/4:3 SMPTE-293M
1080/24PsF
*1
1125 1080 24 Progressive (sF) 16:9 SMPTE-RP211
1080/25PsF 1125 1080 25 Progressive (sF) 16:9 SMPTE-RP211
1080/24P
*1
1125 1080 24 Progressive 16:9 SMPTE-274M
1080/25P 1125 1080 25 Progressive 16:9 SMPTE-274M
1080/30P
*1
1125 1080 30 Progressive 16:9 SMPTE-274M
1080/50I 1125 1080 25 2:1 interlace 16:9 SMPTE-274M
1080/60I
*1
1125 1080 30 2:1 interlace 16:9 SMPTE-274M/BTA S-001B
720/50P 750 720 50 Progressive 16:9 SMPTE-296M
720/60P
*1
750 720 60 Progressive 16:9 SMPTE-296M
Resolution Dot clock (MHz) fH (kHz) fV (Hz)
720 × 400 70Hz 28.322 31.469 70.087
800 × 600 56Hz 36.000 35.156 56.250
800 × 600 60Hz 40.000 37.879 60.317
1024 × 768 60Hz 65.000 48.363 60.004
1360 × 768 60Hz 85.500 47.712 60.015
Input
System Signal standard BKM-320D
575/50I ITU-R BT.656 a
480/60I SMPTE-259M a