Filter
Top Products
How to Use (When using Windows)
MSAC-PC3 3-078-326-12(1).US/FR
13-US
– When Using Windows 98/Windows 98SE/Windows Me –
When first using the unit, it will appear in the “My Computer” folder as a
“Local Disk” and not as a “Removable Disk”. There are no problems in
terms of use when it is used like this, though a blue screen may appear
when it is used with the LOCK switch in the locked position and a
warning may appear. In this event, use of the “Memory Stick” with the
disk drive settings changed from “Local Disk” to “Removable Disk” as
shown below is recommended.
1 Insert the unit with the “Memory Stick” inserted into your
computer and install drivers (Page 9). When drivers are
already installed, insert the unit with the “Memory Stick”
inserted into your computer and perform operations
according to the following steps.
2 After installation is complete, write down the drive letter
assigned to the “Memory Stick”. You can check the drive
letter by opening “My Computer” from the desktop.
3 Open the “Control Panel” from the [Settings] in the [Start]
menu.
4 Double-click [System].
5 Select the [Device Manager] tab from “System Properties” and
double-click [Disk drives].