Filter
Top Products
Change to Current Document Title
124
My microphone does not work
If you are using an external microphone, check that the microphone is plugged
into the Microphone connector. See “Connecting an External Microphone” for
details.
Troubleshooting the printer
I cannot print
❑ Your connected printer may not function after the notebook resumes from a
power saving mode. If this occurs, follow these steps to reset the printer
connection:
❑ Right-click My Computer icon on the desktop, then select Properties.
❑ Click the Device Manager tab.
❑ Select Refresh, then click OK. The printer should function properly.
❑ Verify that the parallel port is set to the proper mode.
1 Restart your computer, and then press the F2 key when the Sony logo
screen appears. The BIOS setup menu appears.
2 Press the Esc key.
3 Select LOAD BIOS DEFAULTS, and then press Enter.
4 Select EXIT SAVING CHANGES, and then press Enter.
5 Press Enter again. The BIOS defaults are reset and the parallel port
configuration is set to default values.