Filter
Top Products
Sony Notebook User Guide
Connecting peripheral devices
66
nN
Attaching your computer to the port replicator
To attach your computer to the port replicator, proceed as follows:
1 Disconnect all peripherals from the computer.
2 Plug the cable attached to the AC adapter (1) into the DC In port (2) on the port replicator (3).
3 Plug the power cord (4) into the AC adapter and an AC outlet.
The power indicator DC IN (5) of the port replicator turns green.
4 Close the tilt stands before attaching the notebook to the port replicator.
5 Align the bottom connector of the notebook with the connector on the port replicator (6) and push
down until it clicks into place.