Filter
Top Products
%#
My printer doesn't function after the computer resumes from a power
saving mode
When this occurs, follow the procedures below to reset the printer
connection:
1
Right-click the My Computer icon on the desktop, and then select
Properties.
2
Click the Device Manager tab.
3
Select Refresh, and then click OK.
The printer should now function properly.
I cannot play a CD
❑
Make sure the label of the CD is facing up.
❑
If the CD requires software, make sure the software is installed
according to the program’s instructions.
❑
Moisture condensation may have occurred. Disconnect the drive and
disconnect the power to the drive for at least one hour.
❑
Make sure the drive is properly connected. See “Connecting the CD/
CDRW/DVD Drive” on page 52.
❑
Clean the CD.
❑
Check the speaker volume.
When I click an application icon a message appears, such as You must insert
the application CD into your CD-ROM drive, and the software does not start
❑
Some titles require specific files that are located on the application’s
CD-ROM. Insert the disc and try starting the program again.
❑
Make sure you place the disc in the tray with the label side facing up.
My floppy disk drive cannot write to a diskette
❑
The diskette is write-protected. Disable the write-protect feature or
use a diskette that is not write-protected.
❑
Check that the diskette is properly inserted into the floppy disk drive.