Filter
Top Products
17
nN
Using your VAIO
Before you use the keyboard
Before attempting to use the wireless keyboard, you must enable communication between the computer and the keyboard.
Four AA batteries, for use in the wireless keyboard, are supplied with your VAIO.
To connect the wireless keyboard, proceed as follows:
1 Insert the 4 AA batteries (1) into the wireless keyboard as shown.
2 Turn on the computer.
3 Slide the power switch on the right-hand side of the keyboard to
turn on the keyboard (2).
4 Press the CONNECT button on the right panel of the computer (3).
5 Turn the wireless keyboard over and press the
CONNECT button (4). Communication between the wireless
keyboard and the computer is now active.
✍ Steps 4 and 5 must be carried out within 10 seconds of each other.
If your wireless keyboard does not operate properly, the batteries may need to be
replaced. Always use the same type and brand of batteries. If your wireless keyboard is
not being used for extended periods of time, remove the batteries to avoid possible
damage from battery leakage. Do not place other wireless devices or metal objects near
your VAIO or wireless keyboard, as this may cause interference. Do not obstruct the
communication between your wireless keyboard and your VAIO.
If you want to put the keyboard in a more ’ergonomical’ position, open the keyboard feet.