Sony PJ320E Webcam User Manual


 
"Handycam" User Guide
PrintSearch
Operation Search
Before use
Getting started
Recording
Playback
Playing images on a TV
Saving images with an external
device
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Maintenance and precautions > About handling of your camcorder > On moisture
condensation
On moisture condensation
If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside
your camcorder. This may cause a malfunction to your camcorder.
If moisture condensation occurrs, leave your camcorder for about 1 hour without turning it on.
Note on moisture condensation
Moisture may condense when you bring your camcorder from a cold place into a warm place (or vice
versa) or when you use your camcorder in a humid place as follows:
You bring your camcorder from a ski slope into a place warmed up by a heating device.
You bring your camcorder from an air conditioned car or room into a hot place outside.
You use your camcorder after a squall or a rain.
You use your camcorder in a hot and humid place.
How to prevent moisture condensation
When you bring your camcorder from a cold place into a warm place, put your camcorder in a plastic
bag and seal it tightly. Remove the bag when the air temperature inside the plastic bag has reached
the surrounding temperature (after about 1 hour).
Back to top
Copyright 2013 Sony Corporation
200