Filter
Top Products
7
Operational Convenience
Advanced Marker Settings
These monitors can display various area markers, including a
center marker, aspect markers, and a safety zone marker. The
brightness of these markers can be selected from three
different levels: white, gray, and dark gray. Users can also
select either a black or gray matte to fill the outer area of the
aspect markers. These flexible marker controls, together with
the choice of many different aspect markers, make the
LMD-2450W and LMD-2050W extremely convenient display
devices for a variety of shooting scenarios – from standard
video acquisition to digital cinematography.
Marker Variation
Color Temperature
Color temperatures of 9300k, or 6500k, or a user preset
setting can be selected.
Selectable Scan Size for Video Input and Aspect Ratio
The scan size can be selected between 5% over scan and 0%
scan modes. The aspect ratio can be switched between 16:9
and 4:3 according to the input signal.
Three-color Tally
The LMD-2450W and LMD-2050W come equipped with a
tally lamp that can be lit via a parallel remote connector.
The status of the signal displayed on the monitor can be
identified by the tally color - red, green, or amber.
Smart APA (Auto Pixel Alignment) for Computer Input
The image size can be automatically adjusted to its optimal
setting with the one-touch APA key.
Parallel Remote Control
The LMD-2450W and LMD-2050W can be controlled
remotely via a parallel remote connector. There are 38
functions in the remote menu (such as the ability to switch
input signals), of which eight can be allocated to the
connector.
Stereo Audio Monitoring
The LMD-2450W and LMD-2050W are equipped with stereo
speakers (0.5 W + 0.5 W), which enable the user to monitor
audio.
Protected Controls
The key-inhibit function helps prevent inadvertent operation
from the control panel.
Closed-Caption Decoder
The LMD-2450W and LMD-2050W are equipped with a
closed caption decoder. The closed caption information
embedded in the analog composite and component inputs
can be decoded for display.
Convenient Installation
Mounting Flexibility
Mountable in a 19-inch EIA Standard Rack (LMD-2050W)
The LMD-2050W (8U high) can be rack mounted using the
optional MB-529 Mounting Bracket, although wider than the
19-inch rack.
VESA Mounting
Complying with VESA standards, both the LMD-2450W and
LMD-2050W can easily be mounted (100 x 100 mm pitch) on a
wall or ceiling.
Other Features
• WFM and Audio* Level Meter Windows
* Only embedded audio is supported.
• Picture by Picture mode
• H/V Delay Function
• ACC Off
• DC Operation
• Setup Level for Analog Component and NTSC signal
• Sub Control on Contrast, Chroma, Phase, and Brightness
• Blue-Only Mode
• Monochrome Mode
• Auto Chroma/Phase Setup
• Serial Remote (Ethernet, RS-232C, Parallel Remote)
• DVI-D Input
• Power-saving Function (computer input only)
• DCC-2B
High-grade One-piece Type