Filter
Top Products
10
py
AEP.fm
Setup 5:Connect the power cord
1 Connect the supplied power cord securely to the
display’s AC IN connector.
2 Connect the other end securely to a power outlet.
Setup 6:Secure the cords and
close the connector cover
1 Draw the cords and cables through the cable holder
as illustrated.
2 Close the connector cover.
Note
When bounding the cords and cables, be sure to loosen them a little. If
they get pulled hard they may come off from the connectors/plugs as you
adjust the screen angle. If you stretch the cords and cables too hard they
may get damaged.
Setup 7:Turn on the display and
computer
1 Make sure that the 1 (power) Indicator blinks red. At
the time of your purchase, the MAIN POWER switch
is set to the \ side.
Note
When the MAIN POWER switch on the right side of your display is not
set to the \ side, press the \ side and check that the 1 (power) indicator
blinks red.
2 Press the 1 (power) switch located on the front
right of the display.
The 1 (power) indicator lights up in green.
3 Turn on the computer.
to AC IN
to a power outlet
power cord (supplied)
1
2
MAIN POWER
lights in red
lights in green