Filter
Top Products
7
Introduction
About AIT Drives
SDX-800V series drives are internal AIT drive units that use data cartridges
conforming to the AIT-3 Ex format. SDX-800V series drives support
AIT-1, AIT-2, AIT-3 and AIT-3 Ex formats.
Features
The SDX-800V series drives have the following features:
• Support reading and writing to data cartridges conforming to the AIT-3
and AIT-3 Ex formats.
• Supports reading to data cartridges conforming to the AIT-1 and AIT-2
formats.
• The second-level error correction code guarantees high data reliability
writing to data cartridges conforming to the AIT-3 Ex format.
• The third-level error correction code guarantees high data reliability
writing to data cartridges conforming to the AIT-1, AIT-2 and AIT-3
formats.
• Data compression provides 390 gigabytes of storage on SDX3X-150C.
*1
The native capacity is 150 gigabytes of storage on SDX3X-150C.
• Stored data is automatically checked for compression.
• Ultra 160 Wide SCSI LVD/SE interface is fully supported for host
computer access.
*1
This is assuming 2.6 : 1 compression ratio.
The degree of data compression attained while recording data varies according to
system environment and data type.