Sony CPD-17SF2 Computer Monitor User Manual


 
8
SpecificationsPlug and Play
This monitor complies with the DDC1™
and DDC2B™
which are the Display Data Channel (DDC) standards of
VESA.
When a DDC1 host system is connected, the monitor
sycnchronizes with the V. CLK in accordance with the
VESA standards and outputs the EDID (Extended Display
Indentification) to the data line.
When a DDC2B host system is connected, the monitor
automatically switches to the DDC2B communication.
DDC is a trade mark of the non-profit organization, Video
Electronics Satandard Association.
Approx. 6 cm
Use of the Tilt-Swivel
With the tilt-swivel, this unit can be adjusted to be viewed at
your desired angle within 90˚ horizontally and 20˚ vertically.
To turn the unit vertically and horizontally, hold it at its
bottom with both hands.
Damper Wire
Using a white background, very thin horizontal stripes on
the screen are visible as shown on the illustration. These
stripes are damper wires. These wires are attached to the
aperture grille inside the Trinitron tube and are there to
damp vibrations of the aperture grille in order to prevent
them from influencing to the picture quality.
Damper wire
Approx. 6 cm
(Multiscan
17sfII only)
CPD-15SF2
Picture tube 0.25 mm aperture grille pitch
15␣ inches measured diagonally (14”
maximum viewing image) 90-degree
deflection
Video image area
Approx. 285 × 213 mm (w/h)
(11
1
/4
× 8
1
/2 inches)
Logical resolution Horizontal: Max. 1280 dots
Vertical: Max. 1024 lines
Physical resolution Horizontal: Max. 1024 dots
Vertical: Max. 768 lines
Standard image area Approx. 270 × 202 mm (w/h)
(10
3
/4 × 8 inches)
Deflection frequency Horizontal: 31 to 65 kHz
Vertical: 50 to 120 Hz
AC input voltage/current
100 to 120 V, 50/60 Hz, 1.8 A
220 to 240 V, 50 – 60 Hz, 1 A
Dimensions Approx. 368 × 373 × 384.5 mm (w/h/d)
(14
1
/2 × 14
3
/4 × 15
1
/4 inches)
Mass Approx. 13.8 kg (30 lb 7 oz)
CPD-17SF2
Picture tube 0.25 mm aperture grille pitch
17␣ inches measured diagonally (16”
maximum viewing image) 90-degree
deflection
Video image area Approx. 328 × 242 mm (w/h)
(13 × 9
5
/8 inches)
Logical resolution Horizontal: Max. 1280 dots
Vertical: Max. 1024 lines
Physical resolution Horizontal: max. 1280 dots
Vertical: Max. 1024 lines
Standard image area Approx. 300 × 225 mm (w/h)
(11
7
/8 × 8
7
/8 inches)
Deflection frequency Horizontal: 31 to 65 kHz
Vertical: 50 to 120 Hz
AC input voltage/current
100 to 120 V, 50/60 Hz, 1.8 A
220 to 240 V, 50 – 60 Hz, 1 A
Dimensions Approx. 406 × 426.5 × 451 mm (w/h/d)
(16 × 16
7
/8 × 17
7
/8 inches)
Mass Approx. 19.0 kg (41 lb 14 oz)
Design and specifications are subject to change without
notice.
15°
45°
45°