Filter
Top Products
12-GB
Connecting to xDSL, Cable modem, etc.
•If the xDSL modem or cable modem is a router type
c Connect the USB-Ethernet adaptor to the modem with a LAN cable.
•If the xDSL modem or cable modem is a bridge type (1:1)
c With the modem’s Ethernet jack connected to a commercially available
router, connect the USB-Ethernet adaptor to the router’s Ethernet jack
with a LAN cable.
•If the xDSL modem or cable modem has no USB jack
c You cannot use the USB-Ethernet adaptor with such a modem.
Replace the modem with a router type.
•For details on the modem, contact your xDSL or cable company.
•If your cable modem requires the MAC address to be set, you may only
be able to use that address with a model that has been registered. For
details, contact your cable company.
•The MAC address is written on the rear of the USB-Ethernet adaptor.
(Page 8)
•You may not be able to use the USB-Ethernet adaptor when connecting
in some public buildings such as hotels, for example, if authorization is
required.