Filter
Top Products
Short Throwing Distance
Using the short focal lens, you can project on an 80-inch screen
at a focal length as short as 2.3m. This allows for projection of
large-sized images in a limited space.
Security
Password Authentication System
By incorporating a 4-digit password system, it helps to
prevent unauthorised use of the projector.
Control Panel Key Lock
The control panels on the top and side of the projector can
be locked, preventing unauthorised adjustment.
Security Lock
Provides additional security by locking with an optional
security cable.
Low Fan Noise
During operation in standard mode, the projectors emit up to
41dB for whisper quiet operation.
HD-Ready
Accepts high definition and DVD progressive signals, in addition
to standard NTSC/PAL signals.
*Above specifications are including +/-3% tolerance. "Min."=design value x 1.03, "Max."=design value x 0.97
Screen Size (inches) is measured diagonally
a (Min)={(SS x 18.5575/0.6299)-24} x 1.03 b=x-(SS/0.6299 x 3.2)
a (Max)={(SS x 22.6142/0.6299)-24} x 0.97 c=x-(SS/0.6299 x 3.2+36.85)
Wall
Screen
Centre of the screen
Centre of the lens
Floor
a
bc
Distance between the front of the cabinet
and the centre of the lens
Front of
the cabinet
centre of the lens
3.7
X
INSTALLATION
DIAGRAM
a: Distance between the screen and the centre of the lens
b: Distance between the floor and the centre of the lens
c: Distance between the floor and the bottom of the adjusters of the projector
x: Distance between the floor and the centre of the screen (free) unit : mm
Screen Size
mm 40 60 80 100 120 150 200 250 300
a Min. 1190180024003010 3620 4530 6040 7560 9080
Max. 1370 2070 2760 3460 4160 5200 6940 8680 10420
bx-203x-305 x-406 x-508 x-610 x-762 x-1016 x-1270 x-1524
cx-240 x-342 x-443 x-545 x-646 x-799 x-1053 x-1307 x-1561
inches 40 60 80 100 120 150 200 250 300
aMin. 46•7/8 70•7/8 94•1/2 118•5/8 142•5/8 178•3/8 237•7/8 297•3/4 357•5/8
Max. 54 81•5/8 108•3/4 136•1/4 163•7/8 204•3/4 273•3/8 341•7/8 410•3/8
bx-8x-12x-16 x-20 x-24 x-30 x-40 x-50 x-60
cx-9•1/2 x-13•1/2 x-17•1/2 x-21•1/2 x-25•1/2 x-31•1/2 x-41•1/2 x-51•1/2 x-61•1/2