Sony CX76 Projector User Manual


 
28
VPL-CX61/CX63/CX75/CX76/CX80/CX85/CX86/FE40/FE40L/FX40/FX40L/FX51/FX52/FX52L/PX35/PX40/PX41
A-2. Setting Command
Each setting item is described below.
Equipment information
Item Description Default
location Sets location of the equipment installation. (Maximum 24 alphanumeric characters) _
Community Sets the equipment community. (Maximum 4 alphanumeric characters) SONY
n
Location and community do not support Japanese character.
Network setup
Item Description Default
dhcp Specifies method of setting IP address. No
ipaddr IP address 192.168.0.1
subnet Subnet mask 255.255.0.0
gateway Default gateway 0.0.0.0
restart Restarts the network block to make the network setup effective.
m
. When the network setup is changed, execute restart to make the setup effective.
. For the setup of dhcp, set 1 to make DHCP effective and set 0 to make DHCP ineffective.
Service setup
Item Description Default
ad_port Port number of the Advertisement service 53862
ad_interval Broadcast interval of the Advertisement service (in units of second) 30 (seconds)
ad_ip IP address of the Advertisement service 0.0.0.0
rc_port Port number of the Remote Control service 53484
rc_timeout TCP connection timeout time of the Remote Control service (in units of second) 30 (seconds)
m
. When network setup is changed, executing restart is required to make the network setup effective.
. When ad_Interval value is set to 0, the advertisement service is stopped.
. The ad_Interval can be set to 0 or a value in the range of 10 to 65535.
. The rc_timeout can be set to a value in the range of 0 to 65535.