Filter
Top Products
36 The MENU SETTING Menu
Input-A Signal Sel.
Selects the computer, component or video
GBR signal input from the INPUT A
connector.
If the setting is not correct, the color of the
picture becomes strange or “Please check
Input-A Signal Sel.” appears on the screen and
the picture is not displayed.
Color System
Selects the color system of the input signal.
If you select “Auto,” the projector detects
the color system of the input signal
automatically. If the picture is distorted or
colorless, select the color system according
to the input signal.
Power Saving
When set to “On,” the projector goes into
power saving mode if you do not operate the
unit for 10 minutes with no signal input.
Illumination
Selects whether the SONY logo on the rear
of the projector lights when the projector is
on. Normally, this setting is “On”. If you
want complete darkness or if the illuminated
logo is a distraction, change this setting to
“Off”.
The MENU SETTING
Menu
The MENU SETTING menu is used for
changing the settings of the projector.
Status (on-screen display)
Sets up the on-screen display.
On: Shows all of the on-screen displays.
Off: Turns off the on-screen displays except
for the menus, a message when turning
off the power, and warning messages.
Language
Selects the language used in the menu and
on-screen displays. Available languages are:
English, Nederlands, Français, Italiano,
Deutsch, Español, Português, ,
Svenska, Norsk, , and .
Menu Position
Selects the display position of the menu
from Top Left, Bottom Left, Center, Top
Right and Bottom Right.
Menu Color
Selects the tone of the menu display from
Black or White.
Note
Menu Items
Status: On
Language: English
Menu Position: Center
Menu Color: White
MENU SETTING
Input A
A