Sony SRX-S110 Projector User Manual


 
Sony is proud to introduce a series of SXRD
ultra
high-resolution projectors, which offer supreme
picture quality and reality for applications that require
highly sophisticated visuals. This state-of-the-art
Sony projector series, comprising the SRX-S110,
SRX-S105, SRX-R110CE, and SRX-R105CE models,
provides a new solution for applications such as
command & control, simulations, computer
visualisations, planetarium and museum exhibitions,
and much more.
Each model is equipped with three Silicon X-tal
Reflective Display (SXRD) imaging devices and
delivers an amazing resolution of 4096 x 2160 pixels
(H x V) – more than four times the resolution of HD
(1920 x 1080, 16:9 wide screen format).
The ultra high resolution capability enables a single
HD or 2K image to be internally up-converted by the
projector and displayed as a 4K image for a stunning
image. Aternatively the projector's multiple screen
mode allows full HD images to be displayed
simultaneously in four quadrants or in a twin
"side by side" display.
The projectors also offer a contrast ratio of more than
1800:1. In addition, the SRX-S110 and SRX-R110CE
models provide a high brightness of 10,000 ANSI
lumens*, while the SRX-S105 and SRX-R105CE
models offer a brightness of 5,000 ANSI lumens.
The use of twin Xenon lamps combined with multiple
gamma curves of 1.8, 2.2, and 2.6 means they offer
pure, high-quality colour tonal reproduction.
The SRX-S110 and SRX-S105 models – each
with one fixed DVI input module – have a 1080/60P
display capability available only with these units,
making them ideal for high-end computer graphic-
based projection applications. On the other hand, the
SRX-R110CE and SRX-R105CE models – supplied
with one removable analogue input board– are more
suited to video-based projection applications.
Sony SXRD 4K projectors are the ultimate tool for
image display in a variety of critical applications from
high resolution visualisation systems to large-venue
projection.
*
ANSI lumens is a measuring method of the American National Standards
Institute IT 7.228. Since there is no uniform method of measuring brightness,
specifications will vary among manufacturers.
3