Sony SUN 17e10/SGI 17e11-PC Computer Monitor User Manual


 
CABLE CONNECTION :
This monitor is converted to Pc and uses standard VGA DB15 connection.
This monitor can work with any Macintosh system with the appropriate adapters or cables
required.
FRONT PANEL :
This monitor has the following Controls:
Color temp, Convergence, Geometry, Size , Centering, Select , -,+ Brightness, -,+ Contrast
-,+ Brightness is used for adjusting vertical convergence, size and centering when
appropriate SELECT button is pressed first.
-.+ Contrast is used for adjusting horizontal convergence, size or centering if the appropriate
SELECT button is pressed first.
To adjust the screen Size for example, the SELECT button must be pressed first to show the
size LEDselect the desired mode and then using the Adjust -,+ keys you can increase,
decrease the sizes.
The Select Button is for On Screen Color, Focus. you can adjust Individual colors
guns and Monitor Temp.
1 The brightness control adjusts the brightness of the display
2 The contrast control adjusts the light-to-dark and dark-to-light contrast of the display.
3 The monitor degausses automatically at the power up. Degaussing disperses any
accumulated magnetic charge from the face of the monitor. Magnetic disturbances such as
picture distortion or color impurity can be caused by either moving the monitor from one
location to another or swiveling the monitor on its base. It is normal for the tube to shake
during degauss mode.
Power Button:
The front Power button is used to select the monitor to be on or off. Orange light will appear
when monitor is in sleep mode or when no power is connected.
Zeon PDF Driver Trial
www.zeon.com.tw