Filter
Top Products
13-GB
The setup of the AREA CODE switches
The default AREA CODE setting is “Japan”.
Set the AREA CODE switches to the appropriate positions using a sharp-
pointed object following the information given in the table below. You
cannot use the unit in areas other than the areas indicated on the table.
Notes
•“1” for the parameter in the table indicates that setting the switch to the
ON side.
•The relationship between the 6-digit numbers in the table and the switch
positions is as illustrated below.
(e. g., when you set to Japan) (e. g., when you set to the USA)
The setup list for the AREA CODE switch
Japan 000000 Greece 110100 Sweden 010110
United States 100000 Ireland 101100 Switzerland 110110
Australia 010000 Italy 011100 Taiwan 001110
Austria 110000 Netherlands 010010 United Kingdom 101110
Belgium 001000 New Zealand 110010 Canada 100000
Denmark 111000 Norway 001010 Hong Kong 100000
Finland 000100 Portugal 011010 Luxembourg 001000
France 100100 Singapore 111010
Germany 010100 Spain 100110
Country
or area
Parameter ParameterCountry
or area
Country
or area
Parameter
P2
TONE
P1