Filter
Top Products
The VPL-V800Q/V800QM can be
desk top mounted, ceiling mounted
and used for rear projection. For
greater installation flexibility, the
picture shift function of the
VPL-V800Q/V800QM projection
system enables the image to be
shifted up and down without
keystone distortion. A 1.6 times
power zoom and power focus
functions also permit both picture
size and lens focus to be changed
easily to match on-site installation
conditions. The VPL-V800Q/
V800QM can reproduce images on
screen sizes ranging from 40 to 300-
inches.
Twin stacking capability
The VPL-V800Q/V800QM can be
twin stacked*. In this installation, the
brightness is doubled. When two
projectors are stacked, the picture
RM-PJM800 RM-PJ10
Installation Flexibility
Easy Operation
Others
VPL-V800Q/V800QM
Picture can be shifted within this range.
shift function helps match the two
pictures.
* Images are reproduced on screen sizes ranging from
60 to 240-inches.
Memory function
The VPL-V800Q/V800QM is simple
to operate. There are no
complicated adjustments to perform-
just connect the image source, and
the VPL-V800Q/V800QM will
automatically recognize the input
signal and select the appropriate
display mode from preset
parameters. This memory function
allows the projection system to be
set up and aligned quickly and
easily.
On-screen display
Operational functions and
adjustment status are displayed on-
screen. The menu can be selected
from one of seven languages:
English, French, German, Italian,
Spanish, Japanese and Chinese.
Remote control
capability
The wired/wireless remote commander
RM-PJM800 controls all projector
adjustments and operations. By
connecting the optional remote control
receiver RM-PJ10 to the projector, the
operational range of the remote
commander can be extended.
Furthermore, when the optional mouse
receiver RM-PJ21 is connected to a
computer, the RM-PJM800 can also
remotely operate the connected
computer.
Power saving function
The VPL-V800Q/V800QM
incorporates a power saving
function. When the power saving
mode is set to ON, and the projector
has not received any input or sync
signal for over 10 minutes, the
projector automatically reduces its
power consumption. The projector
automatically returns to its normal
operation mode when recognizing
any signal or command from the
control panel or remote commander.
TRIG terminal
The VPL-V800Q/V800QM has a
TRIG terminal to control an
integrated projection room, including
screens, curtains and lighting.
RM-PJ21