Filter
Top Products
Topics
71
Topic: Why does my modem disconnect when my computer goes into Stand by
mode?
The preinstalled Lucent™ Win Modem does not support the Wake On Ring
(WOR) feature of the Microsoft® Windows® XP operating system. For optimal
use, Sony recommends that you do not change the preset modem settings in the
Power Management Properties window.
Topic: How do I change my modem to rotary or Touch-Tone dialing?
1 Click Start in the Windows taskbar, then click Control Panel.
2 Click Printers and Other Hardware, then click Phone and Modem options.
3 From the Dialing Rules tab, click Edit.
The Edit Location dialog box appears.
4 Select the Tone or Pulse option. Click OK.
Topic: My microphone is too sensitive to background noise.
If you find there is too much background noise when you record sound, you
should adjust the microphone gain by following these steps:
1 Click Start in the Windows taskbar, then click Control Panel.
2 Click Sounds, Speech, and Audio Devices, then click Sounds and Audio
Devices.
3 From the Audio tab, locate the Sound recording section and click the Volume
button.
The Recording Control dialog box appears.
4 Select the Options menu and click Properties.
The Properties dialog box appears.
5 In the section, “Adjust volume for,” select the Recording option. Click OK.
6 From the Recording Control dialog box, decrease the microphone volume
level by moving the slider bar down.
7 Close the Recording Control dialog box and then close the Sounds and
Audio Devices Properties window.