Filter
Top Products
VGN-NW Series Hard Disk Drive
Replacement Instructions
P/N 989200137 Rev. B 2/3
Step 4.
To remove the HDD access
cover, slide the cover in a downward
direction and lift the cover.
Step 5.
Using the enclosed magnetic
screwdriver, remove the two (2) screws
securing the HDD assembly.
Step 6.
Detach the HDD assembly
from the HDD connector by pulling
the clear plastic tab in the direction of
the arrows (slide to the left).
Step 7. Carefully lift the HDD assembly
from the unit to completely remove the
old part.
Step 8. After the HDD is completely
removed, identify the (4) side screws
that mount the HDD bracket to the
HDD.
Step
9
.
Holding the edge of the HDD,
remove each screw and set the screw
aside. These screws will be used to
mount the HDD bracket onto the
new HDD.
Step 12. Place the HDD bracket over
the new HDD.
Step
10
.
All (4) screws and bracket
should now be removed from old HDD.
Set old HDD aside.
Step
11
.
Prepare the new HDD
provided for assembly.
(HDD Disassembly) Steps 8-13
Lift To Remove
OLD HDD
NEW
HDD