Sony VPH-D50HTM Projector User Manual


  Open as PDF
of 140
 
35 (GB)
INPUT-A
SCREEN SEL:1
SIRCS RECEIVER:
FRONT
POWER SAVING: ON
PATTERN:OFF OFF
INDEX:01
5BNC MODE:OFF
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER
EXIT: MENU
T-A
SCREEN SEL: 1
SIRCS RECEI 2
FRO AR
POWER SAVING:OFF
PATTERN:OFF
INDEX:01
5BNC MODE:OFF
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER
EXIT: MENU
LANGUAGE
Selects the language used in the on-screen displays.
Available languages are: English, French, German,
Italian, Spanish, Japanese and Chinese.
ABG (Automatic Background) MODE
Normally, set to ON (factory setting). Cutoff
luminance will be set to a certain level. Set to OFF if
you want to erase the horizontal luminescent line for
cutoff level detection that may appear at the upper part
of the picture.
Note
When ABG MODE is set to OFF, the black level of the
white balance may change.
SCREEN SEL (Select)
Selects the screen to be used.
1: Bead screen
2: Mat screen
SIRCS RECEIVER
Selects the remote control detectors on the front and
rear of the projector, if the wireless remote control
does not operate correctly due to the influence of a
fluorescent lamp, etc.
FRONT & REAR: Activates both the front and rear
detectors.
FRONT: Activates the front detector only.
REAR: Activates the rear detector only.
POWER SAVING
When set to ON, the projector goes into the power
saving mode if no signal is input for 10 minutes. The
screen enters cutoff mode. The power saving mode is
canceled when a signal is input or whenever any key is
pressed.
INPUT-A
SCREEN 
SIRCS FRONT&REAR
FRONT
POWER REAR
PATTER
INDEX:01
5BNC MODE:OFF
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER
EXIT: MENU
STATUS:O ENGLISH
PIC.MUTI FRANCAIS
INPUT-A: DEUTSCH
INPUT-B: ITALIANO
LANGUAGE ESPANOL
ABG MODE 
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER
EXIT: MENU
INPUT-A
STATUS:ON
PIC.MUTING:OFF
INPUT-A:RGB
INPUT-B:RGB
LANGUAGE:
ABG MODE: ON
OFF
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER
EXIT: MENU
 previous next