9
Connecting the Projector
Preparation
B Preparation
Connecting the Projector
• Make sure all the equipment is powered off when connecting the projector.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.
• Use a no-resistance audio cable.
Connection with a computer is explained for each input signal.
INPUT A/INPUT B
Notes
Connecting a Computer
HDMI output
connector
HDMI cable
(not supplied)
VPL-SW535C/SW525C/SW535/SW525
For connecting a computer with an RGB or HDMI output connector.
RGB output
connector
Audio output
connector
Mini D-sub 15-pin cable (supplied
only for VPL-SW535/VPL-SX535)
Computer
Audio cable (Stereo mini plug)
(not supplied)
Computer
Mini D-sub 15-pin cable (supplied
only for VPL-SW535/VPL-SX535)
Audio cable (Stereo mini plug) (not supplied)
RGB output
connector
Audio output
connector
Computer
VPL-SX535
For connecting a computer with an RGB output connector.
