Sony vpl-bw120s Projector User Manual


 
38
Specifications
Specifications
Item Description
Model VPL-BW120S
Projection system 3 LCD system
Display device Effective display
size
0.59-inch (15.0 mm), 3 plate, Aspect ratio 16:10
Effective picture
elements
3,072,000 pixels (1280 × 800 pixels, 3 plate panels)
Projection lens Focus Manual
Light source High-pressure mercury lamp, 210 W type
Projected image
size
50 inches to 100 inches (1.27 m to 2.54 m)
Luminous flux
(Brightness)
2600 lm (when “Lamp Mode” is set to “High”)
Speaker 2 W × 1 (monaural)
Applicable
scanning
frequency
*1
Horizontal: 19 kHz to 92 kHz, Vertical: 48 Hz to 92 Hz
Resolution When a computer
signal is input
Maximum display resolution: 1400 × 1050 pixels (resize)
Panel display resolution: 1280 × 800 pixels
When a video
signal is input
NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p,
576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i
Color system NTSC
3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N,
PAL60
INPUT OUTPUT
(Computer/video)
INPUT A RGB/YP
BPR input connector: Mini D-sub 15 pin
female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75
ohms terminated, RGB/P
BPR: 0.7 Vp-p ± 2 dB, 75 ohms
terminated, Sync signal: TTL level high impedance,
positive/negative
Audio input connector: Stereo mini jack, rated input
500 mVrms, input impedance more than 47 kohms
INPUT B HDMI input connector: HDMI 19-pin, HDCP support,
HDMI audio support
S VIDEO (S
VIDEO IN)
S video input connector: Mini DIN 4-pin, Y: 1 Vp-p ± 2
dB, sync negative, 75 ohms terminated, C: (burst signal)
0.286 (NTSC)/0.3 (PAL/SECAM) Vp-p ± 2 dB, 75 ohms
terminated
Audio input connector: Phono jack × 2, rated input
500 mVrms, Input impedance more than 47 kohms
VIDEO (VIDEO
IN)
Video input connector: Phono jack, 1 Vp-p ± 2 dB,
sync negative, 75 ohms terminated
Audio input connector: Shared with S VIDEO IN
Others connector SERVICE connector: D-Sub 9 pin female