Filter
Top Products
36
VPL-FX30
(2) [Power status inquiry] POWR?
This command obtains the projector’s power status.
The projector responds as follows:
Returns the following values when the power status is obtained:
Standby or power-saving state : Returns “0”.
Power ON state : Returns “1”.
Cooling state, or cooling state during power-saving state : Returns “2”.
Startup state : Returns “3”.
Projector error occurring (including warning) : Returns “ERR4”.
(3) [Input switch command] INPT
This command switches the projector’s inputs.
The available parameter examples are as follows: (The input channel varies depending on the model.)
Parameter 21 : Projector input Video
Parameter 22 : Projector input S-Video
Parameter 31 : Projector input Input A
Parameter 32 : Projector input Input B
Parameter 33 : Projector input Input C
Parameter 34 : Projector input Input D
Parameter 35 : Projector input Input E
Parameter 36 : Projector input Input F
Parameter 41 : Projector input USB
Parameter 51 : Projector input Network
The projector responds as follows:
When processed properly : Returns “OK”.
When inexistent input is specifi ed : Returns “ERR2”.
Unacceptable period (when the power status is other than Power ON) : Returns “ERR3”.
Projector error occurring (including warning) : Returns “ERR4”.