Sony VPL-HS60 Projector User Manual


 
41Installation Menu
Using the Menus
Installation Menu
The Installation menu is used for changing the installation settings.
Item Description
V Keystone Corrects the vertical trapezoidal distortion of the picture.
Sets a lower value (– direction) when the bottom of the trapezoid is
longer than the top ( ). Sets a higher value (+ direction) when
the top of the trapezoid is longer than the bottom ( ).
Note
Depending on the picture position adjusted with the lens shift
feature, the aspect ratio of the picture may change from the original
or picture distortion may occur with V Keystone adjustment.
Image Flip Flips the picture on the screen horizontally and/or vertically.
Off: The picture does not flip.
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally.
V: Flips the picture vertically.
Background Selects the background color of the screen when no signal is input.
You can select “Black” or “Blue.”
Illumination Turns on the illumination on the top panel of the projector when set
to On. It turns off when set to Off.
High Altitude Mode Off: Use this setting when using the projector at normal altitudes.
On: Use this setting when using the projector at an altitude of 1,500
m or higher.
Note
When set to On, the fan inside the projector runs faster.
Network Setting (VPL-
HS51A only)
Displays settings in the network configuration of this projector.
Notes
You cannot change the network settings with this projector. For
information on networking, consult with qualified Sony personnel.
Be sure to set “Standby Mode” in the Function menu to “Standard”
when you use the network function. (1 page 40)
Picture
Signal
Function
Setup
Installation
Information
V Keystone :
Image Flip : Off
0
Background : Blue
Illumination : On
High Altitude Mode : Off
Network Setting
Sel: Set: Back: Exit: